ECCOBOND G757电子组装/工业胶水/电子组装胶水/工业用胶
技术服务热线：021-51693135 / 021-22818476
Product Description: ECCOBOND G757 is a single component, thyrotrophic good flexible heat curing epoxy glue.
-40 ° C to 160 ° C, ECCOBOND G757 presents good flexibility, heat curing, suitable for high-speed production line, can be a good glue glass, steel, copper, aluminum and ERP. Features: easy to use, Absorption stress performance, with a variety of substrate bonding good. Curing process: curing temperature and time to ECCOBOND G757 curing.
Curing will produce a lot of heat, the adhesive layer is less than 0.125 inches (3.2mm), will not produce adverse exothermic reaction. To achieve optimum cure performance, initial curing is initiated and then cured for 2 to 4 hours at the desired maximum operating temperature. The curing time and the curing temperature can also be changed.
Application ECCOBOND G757 is designed for connection of automotive headlamp lenses and mirrors. Storage and handling: ECCOBOND G757 is valid for 6 months at 0 ° C. Stored in original, sealed containers.
Placed in a cool, clean, dry place.
The validity period will vary depending on the application method and storage conditions. Health and safety: ECCOBOND G757 with most of the same industrial raw materials, will be due to contact and stimulate the skin and eyes, so that the body feel uncomfortable.
In high temperature conditions, this product may produce irritation to the breath of the respiratory system.
In the handling, should take good industrial hygiene and safety measures. Pay attention to eye protection and wear chemical clothing to reduce direct contact.
产品介绍：ECCOBOND G757是一种单组分，触变性好的柔性热固化环氧胶。
-40°C到160°C时，ECCOBOND G757呈现良好的柔性，热固化，适于高速生产线，可以很好的胶接玻璃，钢铁，铜，铝及ERP.特征:使用简单，优良的降低和吸收应力性能，与各种基板胶接良好。固化过程：固化温度和时间对ECCOBOND G757进行固化。
固化时会产生大量的热，在胶层小于0.125英寸（3.2mm）时，不会产生不利的放热反应。为达到*佳固化性能，先进行初始固化，然后在期望*高使用温度下后固化2到4小时。
固化时间与固化温度也可改变。
|
 |
|
您当前位置是：产品大全 >> 化工 >>
胶粘剂
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
10
联系信息
