本设备主要用于将直径≤Ф1200mm的普通轮胎和全钢丝子午线轮胎破碎成50*50mm左右的胶块,以便后续中碎工序的进行。其结构主要包括：入料门、电机、传动系统、破碎室、筛选机构和机架等零部件。
该设备的工作原理是：
电机通过传动系统带动破碎室的刀盘转动，然后将已经去除胎唇钢圈的外径≤Ф1200mm的轮胎用输送机送入该设备的入料门，轮胎经由入料门进入破碎室，刀盘以剪切和撕裂的方式对轮胎进行破碎，在破碎过程中，小于或者等于50*50的物料从圆网筛中漏出，进入后续工序；大于50*50的物料经圆网筛返回到破碎室进行循环破碎，直至胶块大小符合要求后排出破碎机。
设备特点：
采用圆滚剪切的方式，优化了受力状况，减少了旋转刀盘被卡死的现象，同时也减少了对破碎室受力状况。
采用硬齿面齿轮减速器，具有承载能力大，效率高，使用寿命长等优点。
采用高硬度耐合金焊条堆焊刀盘刃口，使用寿命长，可进行反复堆焊修补刀刃。
刀轴拆装快捷，安装维修方便。
Tire crusher is applicable for both radial tire and bias tire. This device is designed to crush tires into blocks of 50*50 cm for further processing. It is formed with in feed funnel, motor, gear transmission system, crushing chamber, classifier, main body, etc.
Working principle: the blades in the crushing chamber are driven turning by the main motor to shear the tires with outer diameter less than 1.2m from the in feed funnel. During the shearing process, blocks less than or equal to 50*50mm are filtered out through the screen, bigger size will be send back for crush again until smaller than the above mentioned size.
Advantages:
Double shaft shearing method optimizes the drive force and avoids jam and mean while reduces the moment of overturning
Cycloidal-pin gear speed reducer planetary reducer features high working capacity, high efficiency, low noise, low volume and long lifetime.
Horny alloy blade edge can be shaped several times to ensure long lifetime for blade.
Easy shaft replacement and maintenance.
类别（PSJ1200） 参数
主电机功率（kW）Main power 2*37
刀盘数量（PCS）Blade QTY 22
主轴转速（r/min）Turning speed 12
粉碎轮胎*大外经（mm）Blade length 1200
圆滚筛转速（r/min）Screen turning speed 0.7～3
出料规格（mm）Output size 50*50
产能（kg/h）productivity ≤2000
重量（kg）Weight 14500 |
 |
|
您当前位置是：商业机会 >> 机械及行业设备 >> 工艺品加工设备 >> 废旧轮胎处理设备轮胎破碎机
联系信息