长期现货供应 Luran® S ASA 797 SE
挤出级特别高的缺口冲击强度（如门面板和冲浪板）
Rheological properties Value Unit Test Standard
CAMPUS/ISO Data
Melt volume-flow rate (MVR) 5.5 cm³/10min ISO 1133
Temperature 220 °C ISO 1133
Load 10 kg ISO 1133
Molding shrinkage (parallel) 0.5 % ISO 294-4, 2577
Molding shrinkage (normal) 0.9 % ISO 294-4, 2577
Mechanical properties Value Unit Test Standard
CAMPUS/ISO Data
Tensile Modulus 2000 MPa ISO 527-1/-2
Yield stress 42 MPa ISO 527-1/-2
Yield strain 3.5 % ISO 527-1/-2
Nominal strain at break 11 % ISO 527-1/-2
Tensile creep modulus (1000h) 1100 MPa ISO 899-1
Charpy impact strength (+23°C) 250 kJ/m² ISO 179/1eU
Charpy impact strength (-30°C) 180 kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 40 kJ/m² ISO 179/1eA
Charpy notched impact strength (-30°C) 9 kJ/m² ISO 179/1eA
Thermal properties Value Unit Test Standard
CAMPUS/ISO Data
Temp. of deflection under load (1.80 MPa) 95 °C ISO 75-1/-2
Temp. of deflection under load (0.45 MPa) 100 °C ISO 75-1/-2
Vicat softening temperature (50°C/h 50N) 90 °C ISO 306
Coeff. of linear therm. expansion (parallel) 95 E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.6 mm IEC 60695-11-10
UL recognition UL - -
Burning Behav. at thickness h HB class IEC 60695-11-10
Thickness tested 0.8 mm IEC 60695-11-10
UL recognition UL - -
Oxygen index 19 % ISO 4589-1/-2
Electrical properties Value Unit Test Standard
CAMPUS/ISO Data
Relative permittivity (100Hz) 3.8 - IEC 60250
Relative permittivity (1MHz) 3.3 - IEC 60250
Dissipation factor (100Hz) 90 E-4 IEC 60250
Dissipation factor (1MHz) 260 E-4 IEC 60250
Volume resistivity 1E12 Ohm*m IEC 60093
Surface resistivity 1E13 Ohm IEC 60093
Electric strength 35 kV/mm IEC 60243-1
Comparative tracking index 600 - IEC 60112
Other properties Value Unit Test Standard
CAMPUS/ISO Data
Water absorption 1.65 % Sim. to ISO 62
Humidity absorption 0.35 % Sim. to ISO 62
Density 1070 kg/m³ ISO 1183
Rheological calculation properties Value Unit Test Standard
CAMPUS/ISO Data
Ejection temperature 95 °C -
Test specimen production Value Unit Test Standard
CAMPUS/ISO Data
Injection Molding, melt temperature 250 °C ISO 294
Injection Molding, mold temperature 60 °C ISO 10724
Injection Molding, injection velocity 200 mm/s ISO 294 |
 |
|
您当前位置是：商业机会 >> 化工 >> 塑料原料 >> 【低价供应ASA】 797SE Luran 挤出级 特别高的缺口冲击强度
联系信息