Heating element high performance cartridge
Temperature safety cut-out with automatic reset and second-tier one shot fuse
to protect against overheating in case of fan failure
Axial fan, ball bearing airflow 150m3/h, free flow
service life 50,000h at +25°C (+77°F)
Connection 3-pole dual pressure clamp for rigid wire 2.5mm2, stranded wire (with wire end ferrule) 1.5mm2
Casing plastic according to UL94 V-0, black
Mounting twist clip for 35mm DIN rail, EN 60715 or
screw fixing (M6), torque 2Nm max., washers have to be used
Fitting position vertical airflow (air outlet up)
Dimensions 169 x 127 x 89mm
Weight approx. 1.3kg
Operating/Storage temperature -10 to +50°C (+14 to +122°F)/-45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / heater: II (double insulated); fan: I (earthed)
Approvals VDE, UL File No. E234324, GOST-R
Note other heating capacities and voltages available on request
Important note: Heater may only be operated together with fan (min. 150m3/h). Danger of overheating!
Art. No. twist clip fixing Art. No. screw fixing Operating voltage Heating capacity Pre-fuse T (time-delay)
03084.0-00 03084.0-01 230VAC, 50/60Hz 500W 3.15A
03083.0-00 03083.0-01 230VAC, 50/60Hz 600W 3.15A
03082.0-00 03082.0-01 230VAC, 50/60Hz 700W 4A
03084.9-00 03084.9-01 120VAC, 50/60Hz 500W 6.3A
03083.9-00 03083.9-01 120VAC, 50/60Hz 600W 6.3A
03082.9-00 03082.9-01 120VAC, 50/60Hz 700W 8A |
 |
|
您当前位置是：商业机会 >> 仪器仪表 >> 温度仪表 >> 供应STEGO风扇加热器HVI 030, 500 W - 700 W
联系信息